Power Amplifiers - dhlvn.tech

Dual Color Group & Scene Control Push Button DALI DT8 Panel SR-2422K8-CCT-G1-S2

admin — Tue, 02 Jun 2026 07:47:25 +0000

Push button DALI control panel SR-2422K8-CCT-G1-S2 is a dual color DALI DT8 controller that controls 2 channels output (warm white and cool white) via a single DALI address. The panel controls 1 group address and 2 scene addresses. The group of devices on DALI circuit and scenes to be controlled can be assigned manually by 2 rotary switches on the back. All DALI devices on the circuit can be controlled by the panel through broadcast. The DALI panel enables dimming commands, scene commands and DT8 commands to be sent to the selected group. DT8 commands enable easy color temperature adjusting for the dual color LED lights. 2 predefined or saved scenes can be assigned and recalled to the selected group. It enables to save scenes which will cover the predefined ones. It is compatible with universal DALI masters that support DT8 commands and controls DT8 devices. It is easy to use and no configuration by computer required. Compatible with existing standard size frames from Berker, Merten, Gira, the DALI push button controller can be wall mounted easily.

Key Features

Dual Color Push Button DALI DT8 Control Panel
8 Button Design with Group&Scene Control
Controls DT8 devices
Controls 2 channels output (warm white and cool white) via a single DALI address
Control 1 Group Address and 2 Scene Addresses
Control of All DALI Devices on the circuit through Broadcast
Enables dimming commands, scene commands and DT8 commands to be sent to the selected group
DT8 commands enable easy color temperature adjusting for the dual color LED lights
Compatible with universal DALI masters that support DT8 commands
Enable to Set Start Group Number and Scene Number Manually by 2 Rotary Switches on the back
Easy to Use, No Configuration by Computer Required
Easy Installation, Compatible with Existing Standard Size Frames

Bài viết Dual Color Group & Scene Control Push Button DALI DT8 Panel SR-2422K8-CCT-G1-S2 đã xuất hiện đầu tiên vào ngày dhlvn.tech.

600W 48VDC Non-Dimmable Waterproof CV Driver AWS600-1H48V

admin — Fri, 29 May 2026 06:16:07 +0000

600W 48VDC CV Non-dimming Driver AWS600-1H48V

Features

1. Single channel output with 48V CV direct current

2. With built-in active PFC function

3. Ultra-thin design, Waterproof level IP67, High effciency up to 94%

4. Protections: Short circuit, over load, over voltage, lightning protection

5. suitable for LED CV lighting, such as LED module, LED strip light, LED tube, and so on

Technical Parameters

Model	AWS600-1H48V
Input	Efficiency	94%@230VAC,Full load
	Voltage	220VAC-240VAC
	Frequency Range(Hz)	50/60Hz
	Power Factor	≥0.96@230VAC,Full load
	THD(full load)	<10%@230VAC, Full load
	Standby Power	≤2W
	AC Current(max)	4Amax@230VAC
	Inrush Current(max)	Cold start,73.5A@230VAC 160us
Output	Current(mA)	12.5A
	Voltage (VDC)	48VDC
	Power(W)	600W
	Channel	1
	Current Tolerance	±5%
	No load output voltage	48V Max
	Turn on delay Time	<0.75s, at230Vac (When the light begins to shine)
Protection	Short Circuit	after fault removed Close output ,the output current recovers automatically
	Over Voltage	Reduced current hiccup protection
	Over Load	Reduced current hiccup protection
Safety& EMC	Surgy	L-N 6KV L-PE 10KV N-PE 10KV
	Withstand Voltage	I/P-O/P: 3750Vac/1min/<5mA I/P-GND:1500Vac/1min/<5mA O/P-GND:500Vac/1min/5mA O/P-DIM( Signal port ):1500Vac/1min/<5mA
	Safety Standards	EN61347, GB19510
	EMC Eission	EN50515, EN61000-3-2
	EMC Immunity	EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547
Others	Working Temp.	-20℃~50℃
	Storage Temp., Humidity	-40℃~85℃, 20-90%RH
	tc	90℃
	Material	Metal
	IP Rating	IP67
	Lifetime	50,000h@tc:90℃
	Warranty Condition	5 years
	Switch Cycle	>25,000 times
	Packing(weight)	Net weight: –g±5%/PCS; 10PCS/Carton; –kg±5%/Carton; Carton Size:595320168mm(LWH)
	Dimension	27113150mm（LWH）

Previous:
20W 400~550mA Non-dimmable CC LED Driver ND20-1HMC
Next:
14W 48VDC 120~350mA 0/1-10V DC-DC Driver BMP14A-1SMC

Bài viết 600W 48VDC Non-Dimmable Waterproof CV Driver AWS600-1H48V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

INGY DALI Fixture-integrated Sensorless Controller SR-IG9035A-D

admin — Fri, 29 May 2026 02:10:29 +0000

Specifications

Part No.	Input Power	Input Signal	Output Signal	DALI Consumption	Note
SR-IG9035A-D	DALI BUS	Wirepas (INGY)	DALI	Max. 20mA	Signal Converter

Product Dimension

Wiring Diagram

Bài viết INGY DALI Fixture-integrated Sensorless Controller SR-IG9035A-D đã xuất hiện đầu tiên vào ngày dhlvn.tech.

INGY 0-10V Fixture-integrated Sensorless Controller SR-IG9035A-V

admin — Fri, 29 May 2026 02:10:20 +0000

Specifications

Part No.	Input Voltage	Input Signal	Output Signal	0/1-10V Output Current	Note
SR-IG9035A-V	12-24VAC	Wirepas (INGY)	0/1-10V	Max. 20mA	Signal Converter

Product Dimension

Wiring Diagram

Bài viết INGY 0-10V Fixture-integrated Sensorless Controller SR-IG9035A-V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

INGY DALI Fixture-integrated Sensor-less Controller SR-IG9032A-D

admin — Fri, 29 May 2026 02:10:10 +0000

Specifications

Part No.	Input Power	Input Signal	Output Signal	DALI Consumption	Note
SR-IG9032A-D	DALI BUS	Wirepas (INGY)	DALI	Max. 30mA	Signal Converter

Product Diension

Wiring Diagram

Bài viết INGY DALI Fixture-integrated Sensor-less Controller SR-IG9032A-D đã xuất hiện đầu tiên vào ngày dhlvn.tech.

INGY 0-10V Fixture-integrated Sensor-less Controller SR-IG9032A-V

admin — Fri, 29 May 2026 02:09:59 +0000

Specifications

Part No.	Input Voltage	Input Signal	Output Signal	Output, 0/1-10V Current	Note
SR-IG9032A-V	12-24VAC	Wirepas (INGY)	0-10V	Max. 20mA	Signal Converter

Product Diension

Wiring Diagram

Bài viết INGY 0-10V Fixture-integrated Sensor-less Controller SR-IG9032A-V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

BLE to 0/1-10V Power Pack with 5A Relay & 12V Aux SR-BL2421-5A-AUX

admin — Fri, 29 May 2026 02:09:41 +0000

This Bluetooth to 0-10V signal converter features a Bluetooth® mesh network, built-in 25mA 0-10V output with 5A relay, and sensor input for third-party devices. It supports extended mesh networking, enabling all devices on the 0-10V line to be broadcast-controlled via SunSmart Commissioning Tools. Compatible with Sunricher kinetic energy switches and EnOcean models EWSSB and EWSDB, it is UL Listed (PAZX, UL 2043 Plenum Rated), equipped with an IPEX antenna, IP20 protection, and backed by a 5-year warranty.

Key Features

• Bluetooth to 0-10V signal converter, Bluetooth® mesh network
• Built-in 25mA 0-10V signal output, with 5A relay
• Built-in Sensor input, allow to using 3rd party sensor in logic signal to control the power pack/0-10V Load.
• Mesh network, which has a much longer control distance, transmits received signals to neighboring devices
• All devices on 0-10V line are broadcast controlled by SunSmart Commissioning tools
• Supporting Sunricher kinetic energy switches and EnOcean switches EWSSB and EWSDB
• UL listed, Category: PAZX (Management Equipment, Energy). UL 2043 Plenum Rated
• IPEX antenna
• Waterproof grade: IP20
• 5 years warranty

Bài viết BLE to 0/1-10V Power Pack with 5A Relay & 12V Aux SR-BL2421-5A-AUX đã xuất hiện đầu tiên vào ngày dhlvn.tech.

BLE to 0/1-10V Power pack with 5A Relay & 24V Aux SR-SV2421-5A-AUX

admin — Fri, 29 May 2026 02:09:30 +0000

This Bluetooth to 0-10V signal converter enables seamless integration into Bluetooth® mesh networks, providing reliable dimming control with a built-in 25mA 0-10V output and a 5A relay. It supports third-party sensors via its sensor input for logic-based control of power packs or 0-10V loads. Utilizing mesh networking, it ensures extended range by transmitting signals across neighboring devices. All devices on the 0-10V line are broadcast-controlled using Silvair Commissioning tools. Compatible with Sunricher kinetic energy switches and EnOcean EWSSB/EWSDB switches, this converter features an IPEX antenna, IP20 protection, UL listing under category PAZX, and UL 2043 Plenum Rating, backed by a 5-year warranty.

Key Features

• Bluetooth to 0-10V signal converter, Bluetooth® mesh network
• Built-in 25mA 0-10V signal output, with 5A relay
• Built-in Sensor input, allow to using 3rd party sensor in logic signal to control the power pack/0-10V Load.
• Mesh network, which has a much longer control distance, transmits received signals to neighboring devices
• All devices on 0-10V line are broadcast controlled by Silvair Commissioning tools
• Supporting Sunricher kinetic energy switches and EnOcean switches EWSSB and EWSDB
• UL listed, Category: PAZX (Management Equipment, Energy). UL 2043 Plenum Rated
• IPEX antenna
• Waterproof grade: IP20
• 5 years warranty

Bài viết BLE to 0/1-10V Power pack with 5A Relay & 24V Aux SR-SV2421-5A-AUX đã xuất hiện đầu tiên vào ngày dhlvn.tech.

SIG Mesh To DALI Converter SR-SV9035A-D

admin — Fri, 29 May 2026 02:09:17 +0000

Specifications

Part No.	Input Power	Input Signal	Output Signal	DALI Consumption	Note
SR-SV9035A-D	DALI BUS	Silvair Bluetooth	DALI	Max. 20mA	Signal Converter

Product Dimension

Wiring Diagram

Bài viết SIG Mesh To DALI Converter SR-SV9035A-D đã xuất hiện đầu tiên vào ngày dhlvn.tech.

Silvair Bluetooth to 0/1-10V Power Pack with 20A Relay & 24V Aux SR-BL2421-SVVT-AUX

admin — Fri, 29 May 2026 02:08:59 +0000

The Bluetooth to 0-10V signal converter integrates Bluetooth® mesh network technology, providing enhanced communication capabilities. It features a built-in 25mA 0-10V signal output, a 20A relay and 24V Auxiliary Power output which can power Casambi or third-party sensors. Additionally, the converter supports sensor input, allowing third-party sensors to be used for logic signal control of power packs or 0-10V loads. The mesh network design extends control range by transmitting signals to neighboring devices, offering a significantly longer control distance. All devices on the 0-10V line are controlled via broadcast using Silvair Commissioning tools. The device is compatible with Sunricher kinetic energy switches and EnOcean switches, including the EWSSB and EWSDB models. In typical outdoor environments, the wireless communication range reaches up to 65 meters, depending on field installation conditions. UL listed under Category PAZX (Management Equipment, Energy), it is UL 2043 Plenum Rated and features an IPEX antenna. With an IP20 waterproof rating, the product is designed for durability and comes with a 5-year warranty.

Key Features

• Bluetooth to 0-10V signal converter,Bluetooth® mesh network
• Built-in 25mA 0-10V signal output，with 20A relay
• Built-in Sensor input, allow to using 3rd party sensor in logic signal to control the power pack/0-10V Load.
• Mesh network, which has a much longer control distance, transmits received signals to neighboring devices
• All devices on 0-10V line are broadcast controlled by Silvair Commissioning tools
• Supporting Sunricher kinetic energy switches and EnOcean switches EWSSB and EWSDB
• In typical outdoor environment, the range for wireless communication is about 65meters. Actual range is dependent on field installation
• UL listed, Category: PAZX (Management Equipment, Energy). UL 2043 Plenum Rated
• IPEX antenna
• Waterproof grade: IP20
• 5 years warranty

Bài viết Silvair Bluetooth to 0/1-10V Power Pack with 20A Relay & 24V Aux SR-BL2421-SVVT-AUX đã xuất hiện đầu tiên vào ngày dhlvn.tech.