Feature

1. Three channel constant voltage, 24VDC output
2. Support DMX512 dimming signal
3. Dimming range from 0-100%, LED start at 1% possible
4. Wide range voltage Input 100-240VAC
5. High efficiency: up to 90%
6. High PF:>0.95(115VAC)
7. Dimming effect smooth, no flicker
8. Output short circuit protection , over current protection, over voltage protection

Technical Parameter

• Previous:
  65W 1050/1200/1400mA*1ch DALI CC Driver EULP65D-1HMC-0
• Next:
  Programmable Contact Access Module EUK06

Bài viết EUP150M-3W24V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

Features

· Dual channels constant voltage output,24VDC output
· Support DMX512 dimming signal
· Dimming range from 0.5-100%
· Wide range voltage Input 120-277VAC
· High efficiency: up to 90%
· High PF:>0.95
· Dimming effect smooth, no flicker
· Output short circuit protection , Over load protection,Over voltage protection

Technical Parameters

• Previous:
  6A*4ch DMX512/RDM RGBW Decoder PX0406
• Next:
  75W 24VDC 2ch DMX CV Driver LCP75M-2W24V

Bài viết LCP150M-2W24V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

LCP75M-2W24V is a constant voltage mode output LED driver, adjustment of brightness and colour temperature.

Features

· Double channel constant voltage output,3.125A Max
· High input voltage of 120VAC ~ 277VAC
· Dimming effect smooth, no flicker
· Over load protection; short circuit protection
· IP20, suitable for indoor LED lighting application

Technical Parameters

• Previous:
  150W 24VDC 2ch DMX CV Driver LCP150M-2W24V
• Next:
  20W 350~700mA*2ch DMX CC Driver EUP20M-2HMC

Bài viết LCP75M-2W24V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

Features

· 4 channels constant voltage output, maximum output current: 6.25A

· Meet DALI protocol IEC 62386, DALI-2

· Short circuit, overcurrent, overload protection

· Enclosure with V-0 Flame-Retardant Rating

· The dimming range is 0.5% to 100%, featuring smooth, step-free dimming and flicker-free operation

· The elongated housing design facilitates installation in narrow spaces

· 50,000-hour lifespan with a 5-year warranty

· Dimming Type: DALI & DM

· IP20 protection rating, suitable for indoor Class I, II, and III luminaires

Technical Parameters

• Previous:
  320W 24VDC 0/1-10V Waterproof CC Driver OWP320A-1W24V
• Next:
  40W 12VDC NFC DALI&0/1-10V CV Driver LCP40AD-1H12VN

Bài viết LCP150DM-4H24V đã xuất hiện đầu tiên vào ngày dhlvn.tech.

A variety of features can be set via the visible numeric digital display and the buttons such as DMX address, DMX channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode.

DMX channel quantity can be set from 1CH to 4CH. PWM frequency can be set from 500Hz to ultra high 30KHz, which is perfect for professional film lighting. Gamma ray dimming curve value is adjustable from 0.1-9.9, and logarithmic dimming and linear dimming are optional. DMX Decoding modes are optional and enable to adjust brightness of each output channel, master brightness of all output channels and strobe effects, and default mode is dp1.1.

Key Features

• Dimmable 24V LED Driver, Max. output power 200W
• UL, ENEC and TUV certification
• 100-277VAC universal input
• 4 channels 24VDC constant voltage output
• Class Ⅱ power supply, full isolated plastic case
• Rubycon capacitors
• Built-in two stage active PFC function
• High power factor and efficiency, PF > 0.9, Efficiency > 90%
• DMX interface, DMX512(2008), DMX512-A and RDM V1.0 (E1.20 – 2006 ESTA Standard) protocols, this DMX driver is compatible with universal DMX consoles
• Enable to set DMX address, DMX channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode
• DMX addresses can be manually assigned via buttons and showed on digital display
• To control constant voltage single color, tunable white, RGB/RGBW LED lighting
• Smooth and deep dimming to 0.1% without flickering, no buzzing noise
• IP20 rating, suitable for indoor LED lighting applications

Bài viết SRPC-2108-24-200CVF/TUV đã xuất hiện đầu tiên vào ngày dhlvn.tech.

A variety of features can be set via the visible numeric digital display and the buttons such as DMX address, DMX channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode.

DMX channel quantity can be set from 1CH to 4CH. PWM frequency can be set from 500Hz to ultra high 30KHz, which is perfect for professional film lighting. Gamma ray dimming curve value is adjustable from 0.1-9.9, and logarithmic dimming and linear dimming are optional. DMX Decoding modes are optional and enable to adjust brightness of each output channel, master brightness of all output channels and strobe effects, and default mode is dp1.1.

Key Features

• Dimmable 24V LED Driver, Max. output power 75W
• UL, ENEC and TUV certification
• 100-240VAC universal input
• 4 channels 24VDC constant voltage output
• Class Ⅱ power supply, full isolated plastic case
• Rubycon capacitors
• Built-in two stage active PFC function
• High power factor and efficiency, PF > 0.9, Efficiency > 90%
• DMX interface, DMX512(2008), DMX512-A and RDM V1.0 (E1.20 – 2006 ESTA Standard) protocols, this DMX driver is compatible with universal DMX consoles
• Enable to set DMX address, DMX channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode
• DMX addresses can be manually assigned via buttons and showed on digital display
• To control constant voltage single color, tunable white, RGB/RGBW LED lighting
• Smooth and deep dimming to 0.1% without flickering, no buzzing noise
• IP20 rating, suitable for indoor LED lighting applications

Bài viết SRP-2108-24-75CVF đã xuất hiện đầu tiên vào ngày dhlvn.tech.

A variety of features can be set via the visible numeric digital display and the buttons such as DMX address, DMX channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode.

DMX channel quantity can be set from 1CH to 4CH. PWM frequency can be set from 500Hz to ultra high 30KHz, which is perfect for professional film lighting. Gamma ray dimming curve value is adjustable from 0.1-9.9, and logarithmic dimming and linear dimming are optional. DMX Decoding modes are optional and enable to adjust brightness of each output channel, master brightness of all output channels and strobe effects, and default mode is dp1.1.

Key Features

• Dimmable 24V LED Driver, Max. output power 100W
• UL, ENEC and TUV certification
• 100-240VAC universal input
• 4 channels 24VDC constant voltage output
• Class Ⅱ power supply, full isolated plastic case
• Rubycon capacitors
• Built-in two stage active PFC function
• High power factor and efficiency, PF > 0.9, Efficiency > 90%
• DMX interface, DMX512(2008), DMX512-A and RDM V1.0 (E1.20 – 2006 ESTA Standard) protocols, this DMX driver is compatible with universal DMX consoles
• Enable to set DMX address, DMX channel quantity, PWM output resolution (8 bit or 16 bit), PWM output frequency, GAMMA ray dimming curve value and DMX decoding mode
• DMX addresses can be manually assigned via buttons and showed on digital display
• To control constant voltage single color, tunable white, RGB/RGBW LED lighting
• Smooth and deep dimming to 0.1% without flickering, no buzzing noise
• IP20 rating, suitable for indoor LED lighting applications

Bài viết SRP-2108-24-100CVF đã xuất hiện đầu tiên vào ngày dhlvn.tech.

Key Features

• Dimmable LED driver, max. output power 75W total
• 4 channels constant current output, 300mA-1500mA output current optional
• Dips to set the operation current
• PWM output resolution ratio 8bit , 16bit settable.
• Output PWM frequency from 500HZ ~ 2K HZ settable.
• Output dimming curve gamma value from 0.1 ~ 9.9 settable.
• Class Ⅱ power supply, full isolated plastic case
• High power factor and efficiency
• To control single color, dual color, RGB/RGBW LED lighting
• Built-in DMX512 interface, support RDM bi-directional communication
• Compatible with universal DMX512 master controllers
• IP20 rating, suitable for indoor LED lighting applications
• 5 years warranty

Bài viết SRP-2108-75CCF đã xuất hiện đầu tiên vào ngày dhlvn.tech.

Key Features

• Dimmable LED driver, Max. output power 50W
• 2 channels constant current output, 250mA ~ 1500mA Adjustable by DIP switches
• Class Ⅱ power supply, full isolated plastic case
• Rubycon capacitors
• Built-in two stage active PFC function
• High power factor and efficiency, PF > 0.93, Efficiency > 86%
• Complying with DMX512(2008) and DMX512-A, this LED driver is compatible with universal DMX master controllers
• DMX addresses can be manually assigned via buttons and showed on digital display
• To control CCT LED lighting
• Smooth and deep dimming to 0.1% without flickering, no buzzing noise
• IP20 rating, suitable for indoor LED lighting applications

Bài viết SRP-2108-50CCT đã xuất hiện đầu tiên vào ngày dhlvn.tech.

Key Features

• Dimmable LED driver, Max. output power 50W
• Standard DMX512 compliant control interface
• RDM function enabled to realize intercommunication between DMX master and decoder
• For example, DMX decoder’s address can be assigned by DMX master console
• PWM output ,250-1500mA constant current output
• Dips to set the operation current
• Class II power supply, full isolated plastic case
• High power factor and efficiency
• To Dim and ON/OFF LED luminaries
• With digital display to show data directly, easily to set and show DMX address.
• Output PWM frequency from 500HZ ~ 35K HZ settable
• Output dimming curve gamma value from 0.1 ~ 9.9 settable.
• IP20 rating, suitable for indoor LED lighting applications
• 5 years warranty

Bài viết SRP-2108-50CC đã xuất hiện đầu tiên vào ngày dhlvn.tech.